基于步冷试验的2.25Cr-1Mo-0.25V钢母材及焊缝回火脆化研究

对原始态、步冷态、脱脆态和脱脆步冷态2.25Cr-1Mo-0.25V钢母材及焊缝冲击试验结果进行分析,得到了母材和焊缝在不同状态下的韧脆转变温度vTr54.2和FATT以及脆化度ΔvTr54.2和ΔFATT。试验结果表明,步冷试验之后,母材发生较低程度脆化或脱脆现象,但是脆化度或脱脆度较低,表明母材具有良好的抗回火脆化性能;经脱脆试验后,母材和焊缝都发生较高程度的脱脆,表明材料的脆化主要是由于回火脆化引起的,脱脆试验使得材料的韧脆转变温度降低;脱脆步冷试验后,焊缝发生较高程度的脆化,焊缝对脱脆步冷试验的敏感性较高,脱脆步冷试验有效促进了焊缝的脆化。在相同脆化条件下,母材的脆化敏感性低于焊缝,焊缝更易发生脆化。     

石墨烯改性涂层防护性能研究

为减少团聚，提高石墨烯在涂层中的分散性，研究采用纳米分散技术预先制备了石墨烯分散液，再将其分散至环氧树脂中获得石墨烯改性复合涂层。通过对石墨烯含量为 0、0.3%、0.6%的复合涂层进行盐水浸泡、盐雾、阴极剥离实验及电化学性能测试，证明石墨烯的加入显著增强了涂层的防护性能。石墨烯复合涂层在 3.5%盐水中浸泡 1 008 h后，涂层低频阻抗仍大于 106 Ω·cm²比未添加石墨烯的涂层提高了 3个数量级，且盐雾实验 6 000 h后涂层表面仍保持完好；含 0.6%石墨烯，的涂层耐蚀行为劣于石墨烯含量为 0.3%的涂层。     

Investigation of the energy-size reduction and mineral liberation of raw coal in the Hardgrove mill

Raw coal was ground in a Hardgrove mill, and mineral liberation from coal was investigated by float-sink test and electron probe microanalyzer (EPMA). Based on EPMA, associated conditions of mineral were determined. Analyses of energy-size reduction show that energy efficiency decreases with time. For +0.074 mm progenies, yields of particles in ?1.5 g.cm^?3 decrease with the increase of size and time, and products in +1.8 g.cm^?3 show the opposite trend. EPMA of 0.25–0.125 mm, 1.5–1.8 g.cm^?3 products ground for 10 min indicates that only part of minerals are liberated. For ?0.074 mm products, the yield of particles in ?1.5 g.cm^?3 decreases by 23.36% in last several minutes, but ash content of +1.8 g.cm^?3 also decreases by 13.18%. Since breakage of raw coal in last 9 min does not reduce particle size obviously, and liberation degree cannot be improved dramatically, closed grinding of 10 min in Hardgrove mill is proper to balance the size reduction and mineral liberation.     

Development of an immunochromatographic assay for the β-adrenergic agonist feed additive zilpaterol

Zilpaterol is a β-adrenergic agonist feed additive approved in the United States to increase weight gain and improve feed efficiency of cattle. A zilpaterol immunochromatographic assay was developed as an economical and user-friendly rapid detection method for zilpaterol and validated using urine and tissue samples derived from animal studies. The assay sensitivity was 1.7–23.2 ng g^?1 or mL^?1 across a variety of feed and animal matrices and did not cross-react with clenbuterol or ractopamine. No sample pre-treatment of cattle and sheep urine was needed, but horse urine and feed required dilution; skeletal muscle required solvent extraction prior to testing. Of 32 incurred sheep urine samples tested, zilpaterol content was correctly identified in all but 2 samples. Horse urine containing >10 ng mL^?1 of incurred zilpaterol residue (n = 48) was correctly identified as zilpaterol positive. The assay correctly identified 0-day withdrawal sheep muscle samples as zilpaterol positive and the control and longer withdrawal day sheep muscle samples as negative. Zilpaterol was demonstrated to be stable in horse urine when stored at ?20°C for 7 years.     

风速时间序列混沌判定方法比较研究

混沌识别是对非线性时间序列进行混沌预测的前提。针对时间序列风速确定性与随机性相结合的复杂非线性特征,研究了不同的混沌识别方法,并对风速时间序列进行混沌特征识别。应用随机噪声、周期运动及经典混沌系统的时间序列对所选方法进行可靠性验证。对美国国家风能研究中心M2测风塔实测时间序列风速数据进行非线性混沌特征识别。结果表明:风速时间序列具有明显的混沌特征;各风速时间序列表现出不同程度的混沌特征;各混沌识别方法对风速时间序列混沌特征的表达形式不同,互为补充,相互验证。     

A PV installation framework concerning electricity variable rates

This paper assesses building integrated photovoltaic (BIPV) installation parameters based on the profit generated by a photovoltaic system. It takes into consideration a home building case study and it investigates its monthly energy demand based on a specific location and a typical occupancy. The capability of a photovoltaic (PV) system to generate more profit occurs when solar intensity is maximum while the electric energy price is at its highest rate. The paper traces a framework that encompasses different aspects such as energy demand, energy price, and solar intensity. This framework identifies profit alternatives according to different installation parameters. A tool that predicts a PV installation hourly electric energy production is developed. The profit generated is simulated for home buildings located in Beirut (Lebanon) and Xihua (China), both at 33.8° latitude north. The paper highlights a new approach for BIPV installations, taking into account weather conditions, energy demand, and electric energy utility rates.     

增材制造技术在超高膨胀封隔器中的应用

石油和天然气行业不断关注增材制造技术在航空航天和汽车行业的应用发展。研发了利用增材制造技术的超高膨胀封隔器,该封隔器的支承环系统由增材制造。增材制造设计大幅减少了支承系统的构件数量,同时显著提高了膨胀能力和额定压力。密封元件系统与增材制造支承环安装在一起,提供了极端膨胀比、零挤压间隙和对不规则孔的良好适应性。分析和测试结果表明:直径膨胀比高达111%,与常规封隔器相比,提高50%以上; 至少涵盖5种线重的套管(外径相同); 在148.89 ℃的温度下,密封元件能够保持压力68.95 MPa。介绍了增材制造技术、增材制造支承环概念、增材制造材料力学性能、密封元件系统优化和测试情况,以期给我国的完井作业提供借鉴。     

无线基站电磁辐射分析与探讨

本文首先阐述我国无线基站电磁辐射的定义和辐射预测量化理论,对国内通信基站辐射相关标准进行分析,选取某电信运营商现网对基站进行多点位测试,提出采集方案与数据分析方法,对距离移动基站不同点位的辐射值进行记录并统计,发现基站电磁辐射随距离变化的规律,并据此原理提出弱化电磁辐射的方法及建议,为无线基站建设提供实际数据依据和理论支撑。     

Planetary motion cross bar friction test for application in machining process

This paper describes a new method to evaluate the friction coefficient at the tool-work interface in machining process where high stress and temperature are caused. In order to examine the feasibility of the proposed method, the present report introduces the method and the results obtained only at room temperature. Ti6Al4V, SUS304, AISI1045, FCD 700, FCD 450 and FC300 were used as work materials, while TiN coated carbide tool, TiAlN coated carbide tool and P15 were used as tool materials. The proposed method provided the friction coefficients of different coatings against different work materials, and demonstrated the variability of friction coefficient and the anisotropy of surface roughness.     

膨胀剂对约束条件下UHPC早期抗裂性能影响的试验研究

超高性能混凝土(UHPC)在钢桥面铺装结构中由于铺装材料受到钢板、栓钉等的约束,加上材料本身水胶比小,更易收缩,早期容易承受拉应力导致开裂。通过在拌和过程中添加膨胀剂可以起到减小收缩的作用,但该方法对于约束条件下的UHPC铺装的早期抗裂性能提升是否有促进作用,仍需通过更多试验进行合理评估和深入研究。通过圆环法对3组不同配方的UHPC在均匀约束条件下的早期抗裂性能进行定量测试,并将试验数据进行回归分析和计算,得到了各组的平均应力发展速率,进而评估了各组的开裂风险等级。试验结果表明,通过在UHPC中加入适量膨胀剂,可使其最终收缩应力减小,并可降低其收缩应力发展速率,进一步降低其在约束条件下的开裂风险。